Neuspeed Upper Strut Tie Bar
The NEUSPEED Upper Front Strut Tie-Bar is a must for all cars from street to all-out
competition. The NEUSPEED bar takes the roll and twist out of the sheet-metal frame –
an inherently weak spot. Unlike hinged, single-bolt designs which flex and pivot, the
NEUSPEED bar's solid mounting is very rigid, making steering quicker and more responsive
to your touch. You will feel the difference in handling! This bar is especially important if you
change to larger tires. Our lightweight twin-tube design easily bolts to the strut towers, a
strong point on each side of the body, to provide maximum performance with the greatest
strength. All NEUSPEED bars are made from heavy-wall, 3/4-inch and 7/8-inch diameter
steel tubing ('98 Accord, Golf IV and Jetta IV use 1'' tubing) aircraft heliarc welded to
1/4-inch steel mounting plates, and feature a wet-look gloss black powder-coat finish.
We now offer polished NEUSPEED upper strut tie-bars. These new bars are chrome plated
to a mirror finish. NEUSPEED bars install in minutes on most applications by bolting to
the factory strut/tower retaining studs or bolts. Some VW applications may require drilling
four holes by marking the self-aligned Strut Tie-Bar and installing special aircraft threaded
Nutserts® with the tool provided. Each Nutsert withstands over 800-lbs pull and provides
the greatest strength to tie in the front body panels. NEUSPEED Strut Tie-Bars fit with all
standard factory equipment, and all service work is performed in the normal manner.
NEUSPEED was the first... and is by far the best strut tie-bar on the market.